BCWIRE Logo

    MAGNET WIRE


    UL FILE NO. E158033

 


 

零缺陷漆包銅圓線

具有高耐熱等級的電線,零缺陷加強絕緣和耐高電壓符合IEC60317-56(出版2012.05)/ IEC60950U。 與標稱導體直徑0.04毫米到1.6毫米,類180ºC。

  • OBJT2 UL認證 (UL File No.E491285) Cat. #FIW-xB, FIW-xF.
  • MW85C NEMA標準 (UL文件 No.E158033)Cat.Number FIW

該線可滿足小型化成分,良好的卷繞性能和低成本的要求,適用於小型變壓器, 電子開關等的線是最好的替代材料TIW(三層絕緣線)。

我們的電磁線“FIW”超過30次相遇塗到FIW3,FIW4,FIW5以下等級達到FIW9。例如:FIW3 0.050毫米線最大外徑0.072毫米和最小擊穿電壓是3000伏特。FIW8 0.050毫米線最大外徑0.127毫米和最小擊穿電壓是8000伏。

特性

1. 高耐熱等級180ºC(TIW單層或多層絕緣線只有105ºC-130ºC);

2. 高擊穿電壓 > 15KV;

3. 良好的絕緣電阻,6000Vrms,1min;

4. 可軟焊,390℃,2s;(無需剝開絕緣層);

5. 高切通溫度,250℃,2s 無刺穿,空氣回流(260℃)無開裂;

6. 可選顏色:自然色(N)/紅色(R)/綠色(G)/藍色(B)/紫色(V)/棕色(Br)/黃色(Y);

7. 良好的纏繞功能,適用於高速纏繞機器;

8. 可選小尺寸,最小直徑0.040mm,這個尺寸的無擠壓線可選;

9. 低成本,約TIW單層或多層絕緣線的壹半.

 


main page
To Main Page


BCwire ® is P. Leo & Co., Ltd. trade mark.


BCwire Logo

© P. LEO 1996-2016

DISCLAIMER:
The information contained in above and all Chart pages is compiled for the convenience of site visitors. All information without responsibility for accuracy and it is accepted by the site visitor on the condition that transmission or omissions shall not be made the basis for any claim, demand or cause for action. The information and data were obtained from sources believed to be reliable, but we do not guarantee its accuracy. Neither the information, nor any opinion expressed, constitute a solicitation of the purchase or sale of any securities, futures or options.